Processing Forms; Interrupting Operation - Pressure Seal Group PS 600 Operator's Manual

PS 600

Processing forms

Before proceeding, make sure you have started up and tested the machine and that the
test form is properly folded and sealed.
1. Press the Reset button to zero the counter (if required).
2. Press and hold the run switch for 2 seconds until the next form is processed.
The machine processes all the forms loaded, until the in-feed tray is empty.
The machine stops automatically after the last form is processed. The Empty
message is shown on the LCD display, indicating the in-feed tray is empty.
3. Remove the sealed forms from the conveyor.
4. When you have finished using the machine, turn it off at the mains power
supply.

Interrupting operation

Press the Off/Stop switch at any time to cease processing.
22-01-03 Iss. B.
4. Operation
Page 29