Folder Components; Form Feeder; Folding Plates; Folding Rollers - Pressure Seal Group PS 600 Operator's Manual

PS 600
2. Features

Folder components

Form feeder

The forms are stacked between the form feed arms of the In-feed bed. Using positive air
pressure to support the main body of the forms, the leading edge of the bottom form is
sucked on to the feed roll, providing reliable single-sheet form feeding into the folding
area.

Folding plates

These provide for simple "V" (centre or half) folds, "Z" (zigzag) folds or "C" (letter) folds.
The plates are adjustable to accommodate various form lengths.

Folding rollers

The folding rollers work in conjunction with the folding plates to produce folds. The
rollers feed the form into and out of the folding plates. The top roller is removable, which
aids recovery of mishandled forms (see page 32).
Page 8
22-01-03 Iss. B.