Cleaning The Machine; Cleaning Procedure - Pressure Seal Group PS 600 Operator's Manual

6. Cleaning the machine

Cleaning procedure

The machine's folding and sealing mechanisms should be cleaned in the following
manner:
To avoid leaving finger-marks on the machine's internal rollers, it is recommended
that disposable gloves are worn during cleaning. People susceptible to dust allergies
may be more comfortable wearing a protective mask.
1. Be sure that the room is well ventilated.
2. Switch off the mains power and unplug or disconnect from the mains.
3. Remove the first fold plate.
4. Remove the second fold plate.
5. Remove as much paper dust as possible using a soft brush. Try to avoid letting
the dust drift down into the lower machinery.
If compressed air is used to clear the paper dust, use only a
recommended cleaning kit (part number 70-0019-00).
6. Moisten a clean, lint-free cloth with the cleaning solution.
Avoid breathing the fumes or getting the solution in an open
wound or other sensitive areas such as the eyes or mouth.
Read the label on the container carefully before use.
22-01-03 Iss. B.
Page 39