Appendix A - Form Loading Guide - Pressure Seal Group PS 600 Operator's Manual

Appendix A - Form Loading
Many variables must be considered when setting up the folder/sealer, and loading forms
for processing. These include the form design, type of fold and how the folded/sealed
forms should be orientated when they reach the conveyor.
Settings
First folding plate:
Half of the form length.
Second folding plate:
Fit deflector plate.
Feeding problems:
Rotate form 180 degrees.
22-01-03 Iss. B.
Guide
Settings
First folding plate:
Two thirds of the form
length.
Second folding plate:
One third of the form length.
Feeding problems:
Print backside of form first.
Glued edge leading
Settings
First folding plate:
One third of the form length.
Second folding plate:
One third of the form length.
Feeding problems:
Flip form, then rotate 180
degrees.
Page 43