Operation; General - Pressure Seal Group PS 600 Operator's Manual

General

Operating the machine is a simple three-step process:
1. Verify the machine is set for the fold style required by the forms.
2. Place the forms in the in-feed tray and adjust if necessary (see page 22).
3. Start the machine.
Apart from adjusting the fold plates and clearing mishandled
forms, no internal adjustments should be made to the
machine. If adjustments are needed, contact an authorised
service representative.
This section explains in detail how to:
•
Load forms
•
Start up and test the machine
•
Process forms
Any problems that arise from the operation of the machine are addressed in the next
chapter, which includes a troubleshooting guide.
22-01-03 Iss. B.

4. Operation

Page 25