Safety Precautions; Operating Environment - Pressure Seal Group PS 600 Operator's Manual

1. Introduction

Safety precautions

Although the design of your folder/sealer includes safeguards for set-up and operation,
you must adhere to the following precautions.
No one should use the machine unless they have been trained to do
so. Pressure Seal Systems Ltd accept no responsibility for
unauthorized use.

Operating environment

•
Dress safely. Loose clothing, long hair and jewellery can become tangled in moving
parts.
•
Keep your work area and the machine clean and clear of dust or debris. Details of
how to clean the machine thoroughly are given in Chapter 6.
•
Do not place the machine on an unstable stand or table. The machine may fall,
causing serious damage or injury.
To avoid personal injury and damage to the machine, it should
always be lifted by mechanical means.
•
Do not allow anything to rest on the mains lead. Do not relocate the machine where
anyone will walk on the lead.
•
Operate the machine only with the forms properly loaded in the in-feed tray and the
out-feed tray/conveyor initially empty.
•
Keep hands clear of the in-feed and out-feed areas when the machine is running.
Except as explained elsewhere in this operator manual, do not
attempt to service the machine. Doing so may expose you to
dangerous voltages or other risks. Do not remove the protective
side covers from the machine. Refer servicing to qualified service
personnel. Only trained, authorised service personnel should
remove the protective side covers - and then only for servicing
purposes.
Page 4
PS 600
22-01-03 Iss. B.