How To Use This Manual - Pressure Seal Group PS 600 Operator's Manual

PS 600

How to use this manual

Here is a summary of what is contained in this manual and where:
•
Features (page 7) - describes the major components you use to set up and operate
the machine. New operators should read this section to gain a basic understanding of
how the machine works. Experienced operators should read this section when they
have a specific question about the function of a particular feature.
•
Set-up (page 13) - outlines the tasks required to set up the machine. Provides easy
step procedures for removing the folding plates and setting up the folder. New
operators should read each procedure as they perform the task. Experienced
operators should refer to relevant parts of the procedure to find answers to specific
questions.
•
Operation (page 25) - provides easy step-by-step procedures for loading and starting
the machine.
•
Operation errors (page 31) - lists common operating problems and possible causes
and solutions.
•
Cleaning (page 39) - provides details of the cleaning required to keep the machine in
the best possible condition.
•
Specifications (page 41) - provides the technical details of the folder/sealer.
•
Form loading guide (page 43) - explains how to load forms based on the form
design, type of fold, condition of forms (if they are curled or not - see Appendix B on
page ), and how the folded/sealed forms should be orientated when they reach the
conveyor.
22-01-03 Iss. B.
1. Introduction
Page 3