Table of Contents
Advertisement
PS 100
Processing forms
Before proceeding, make sure you've started up and tested the PS100 and that the test
document is properly folded and sealed.
1.
Reset the counter (if required).
2.
Press and hold the run switch until the next document is processed.
The PS100 processes the documents loaded on the feed table.
The PS100 automatically stops after the last document is processed. The run
switch light turns off indicating the feed table is empty.
3.
Remove the sealed documents from the stacker.
4.
When you have finished processing documents, disconnect the PS100 from the
mains power supply.
Interrupting operation
Press the Off/Stop switch at any time to cease processing. Do not stop the machine by
removing the lid as this may damage the machine.
14-11-02 Iss. 1.
4. Operation
Page 25
Advertisement
Table of Contents
