Operating the PS100
Operating the PS100 is a simple three-step process:
1.
Verify that the machine is set for the fold style required by the documents.
2.
Place the forms in the in-feed tray and adjust the forms width guide plate if
necessary.
3.
Start the machine.
It is not recommended that any internal adjustments be
made to the PS100. If adjustments are needed, contact an
authorised service representative.
This section explains in detail how to:
•
Load documents
•
Start up and test the PS100
•
Process documents
Any problems that arise from the operation of the PS100 are addressed in the next
chapter, which includes a troubleshooting guide.
14-11-02 Iss. 1.
4. Operation
Page 21