Figure 24 - Modify Virtual Access Point Settings (Ieee802.1X) - D-Link DWL-2600AP Administrator's Manual

Unified Access Point Administrator's Guide
This mode requires the use of an external RADIUS server to authenticate users. The AP requires a RADIUS server
capable of EAP, such as the Microsoft Internet Authentication Server. To work with Windows clients, the authentication
server must support Protected EAP (PEAP) and MSCHAP V2.
You can use any of a variety of authentication methods that the IEEE 802.1X mode supports, including certificates,
Kerberos, and public key authentication. You must configure the client stations to use the same authentication method
the AP uses.
Field
Use Global RADIUS
Server Settings
RADIUS IP Address
Type
RADIUS IP Address
RADIUS IPv6
Address
RADIUS IP or IPv6
Address 1–3
RADIUS Key
RADIUS Key 1 – 3
Enable RADIUS
Accounting
January 2015

Figure 24 - Modify Virtual Access Point Settings (IEEE802.1X)

Description
By default each VAP uses the global RADIUS settings that you define for the AP at the top
of the VAP page. However, you can configure each VAP to use a different set of RADIUS
servers.
To use the global RADIUS server settings, make sure the check box is selected.
To use a separate RADIUS server for the VAP, clear the check box and enter the RADIUS
server IP address and key in the following fields.
Specify the IP version that the RADIUS server uses.
You can toggle between the address types to configure IPv4 and IPv6 global RADIUS
address settings, but the AP contacts only the RADIUS server or servers for the address
type you select in this field.
Enter the IPv4 or IPv6 address for the primary RADIUS server for this VAP.
If the IPv4 RADIUS IP Address Type option is selected in the previous field, enter the IP
address of the RADIUS server that all VAPs use by default, for example 192.168.10.23. If
the IPv6 RADIUS IP Address Type option is selected, enter the IPv6 address of the primary
global RADIUS server, for example 2001:0db8:1234::abcd.
Enter up to three IPv4 and/or IPv6 addresses to use as the backup RADIUS servers for this
VAP. The field label is RADIUS IP Address when the IPv4 RADIUS IP Address Type option
is selected and RADIUS IPv6 Address when the IPv6 RADIUS IP Address Type option is
selected.
If authentication fails with the primary server, each configured backup server is tried in
sequence.
Enter the RADIUS key in the text box.
The RADIUS Key is the shared secret key for the global RADIUS server. You can use up to
63 standard alphanumeric and special characters. The key is case sensitive, and you must
configure the same key on the AP and on your RADIUS server. The text you enter will be
displayed as "*" characters to prevent others from seeing the RADIUS key as you type.
Enter the RADIUS key associated with the configured backup RADIUS servers. The server
at RADIUS IP Address-1 uses RADIUS Key-1, RADIUS IP Address-2 uses RADIUS Key-2,
and so on.
Select this option to track and measure the resources a particular user has consumed
such as system time, amount of data transmitted and received, and so on.
If you enable RADIUS accounting, it is enabled for the primary RADIUS server and all
backup servers.
Section 4 - Managing the Access Point
Unified Access Point Administrator's Guide
Page 52