Unified Access Point Administrator's Guide
appear in the Known AP List.
Viewing Managed AP DHCP Information
The UAP can learn about D-Link Unified Wireless Switches on the network through DHCP responses to its initial
DHCP request. The Managed AP DHCP page displays the DNS names or IP addresses of up to four D-Link Unified
Wireless Switches that the AP learned about from a DHCP server on your network.
For information about how to configure a DHCP server to respond to AP DHCP requests with the switch IP address
information, see the User Manual for the switch.
Viewing TSPEC Status and Statistics Information
The TSPEC Status and Statistics page provides:
•) Summary information about TSPEC sessions by radio
•) Summary information about TSPEC sessions by VAP
•) Real-time transmit and receive statistics for the TSPEC VAPs on all radio interfaces.
All of the transmit and receive statistics shown are totals since the AP was last started. If you reboot the AP, these
figures indicate transmit and receive totals since the reboot.
To view TSPEC status and statistics, click the TSPEC Status and Statistics tab.
The following table describes the information provided on TSPEC Status and Statistics page.
January 2015
Figure 11 - Managed AP DHCP Information
Figure 12 - Viewing TSPEC Status and Statistics
Section 3 - Viewing Access Point Status
Unified Access Point Administrator's Guide
Page 31