Table 57 - Client Qos Radius Attributes - D-Link DWL-2600AP Administrator's Manual

Unified Access Point Administrator's Guide
RADIUS ID
Attribute
Vendor-Specific (26), 6132,121
LVL7-Wireless-Client-
ACL-Up
Vendor-Specific (26), 6132,122
LVL7-Wireless-Client-
Policy-Dn
Vendor-Specific (26), 6132,123
LVL7-Wireless-Client-
Policy-Up
January 2015
Description
Access list identifier to be applied to 802.1X authenticated
wireless client traffic in the inbound (up) direction.
If this attribute refers to an ACL that does not exist on the AP, all
packets for this client will be dropped until the ACL is defined.
Name of DiffServ policy to be applied to 802.1X authenticated
wireless client traffic in the outbound (down) direction.
If this attribute refers to a policy name that does not exist on the
AP, all packets for this client will be dropped until the DiffServ
policy is defined.
Name of DiffServ policy to be applied to 802.1X authenticated
wireless client traffic in the inbound (up) direction.
If this attribute refers to a policy name that does not exist on the
AP, all packets for this client will be dropped until the DiffServ
policy is defined.

Table 57 - Client QoS RADIUS Attributes

Section 8 - Configuring Client Quality of Service (QoS)
Type/Range
Type: string
5-36 characters (not null-terminated)
The string is of the form "type:name"
where: type = ACL type identifier:
IPV4, IPV6, MAC
: = required separator character
name = 1-31 alphanumeric characters,
specifying the ACL number (IPV4) or
name (IPV6, MAC)
Type: string
1-31 characters (not null-terminated)
Type: string
1-31 characters (not null-terminated)
Unified Access Point Administrator's Guide
Page 103