Figure 78 - Configuring Qos By Using The Web Interface (Class Map Name); Figure 79 - Configuring Qos By Using The Web Interface (Rule); Figure 80 - Configure Client Qos Diffserv Policy Map Settings (Policy Map Name) - D-Link DWL-2600AP Administrator's Manual

Unified Access Point Administrator's Guide
1.) Log onto the AP and navigate to the Client QoS > Class Map page.
2.) Enter class_voip in the Class Map Name field and click Add Class Map.
The page refreshes and additional fields appear.
3.) Select the Match Every option to indicate that all match criteria defined for the class must be satisfied in order
for a packet to be considered a match.
4.) Select Protocol, and then select UDP from the Select From List field to define UDP as a match criteria.
5.) Select Source IP Address and enter the following information:
•) Address: 192.168.1.0
•) Source IP Mask: 255.255.255.0
6.) Select the Destination IP Address option and enter the following information for the VoIP server:
•) Address: 192.168.2.200
•) Destination IP Mask: 255.255.255.255
7.) Click Apply to save the match criteria.
8.) Navigate to the Client QoS > Policy Map page.

Figure 80 - Configure Client QoS DiffServ Policy Map Settings (Policy Map Name)

9.) To create a policy, enter pol_voip into the Policy Map Name field, and then click Add Policy Map.
The page refreshes and additional fields appear.
January 2015

Figure 78 - Configuring QoS by Using the Web Interface (Class Map Name)

Figure 79 - Configuring QoS by Using the Web Interface (Rule)

Appendix B - Configuration Examples
Unified Access Point Administrator's Guide
Page 123