Quick Installation Guide 802.11n Unified Access Point This document will guide you through the basic installation process for your new D-Link Unified Wireless Access Point. DWL-6700AP Documentation also available on CD and via the D-Link Website...
Point on your network. For additional information about how to use the Access Point, please see the User Manual, which is available on the CD included in this package or from the D-Link support website. Figure 1. DWL-6700AP LEDs System Requirements Status (Green): Blinks if there is a system error.
LAN1 Port (PoE in)* Figure 2. DWL-6700AP Rear Panel Connect Computer to * DWL-6700AP can be powered by the included PoE Computer Ethernet Port labeled adapter from either LAN1 or LAN2 LAN on PoE Adapter Installation Figure 4.
Unified Wireless Switch or Wireless Controller. Mounting Options Pole mount is the only option for the DWL-6700AP. 3. Choose a gasket (6 mm or 4 mm) to fit the Cable Requirement Ethernet cable; if LAN2 is not in-use, please Use a Cat 5 cable with an even sheath.
7. Fasten the mounting ties. 5. (Optional) Attach a grounding wire. 6. Attach access point to a pole D-Link DWL-6700AP Quick Install Guide 5...