Table of Contents
Advertisement
1.
OVERVIEW
The 2430GDAC-WARP G-Link D to A Converter provides a simple extension to Evertz MVP monitoring
systems by converting G-Link video signals from coaxial cable or fiber optic cable into a digital DVI
signal and an analog RGB signal that can be displayed on a computer monitor or flat panel screen.
The converter features one G-Link fiber optic input, one G-Link coaxial input, one reclocked G-Link
coaxial output, and one DVI-I video output. Figure 1-1 details the operational structure of the device.
The 2430GDAC-WARP has been designed for use with the Evertz 3000PPMV and 3000PPMG Multi-
video Monitoring Processors.
The 2430GDAC-WARP is an enhancement over the 2430GDAC. WARP resolutions (video dimensions
that have a narrow aspect ratio) can be displayed in addition to all standard resolutions up to SXGA.
Evertz MVP systems are capable of outputting WARP resolutions over G-Link signals.
Features:
•
Display resolution capability up to SXGA (1280x1024) at a 60Hz refresh rate.
•
WARP resolution capability.
•
DVI-I Digital and Analog video output.
•
Auto-detection of display resolution with manual override.
•
One reclocked G-Link coaxial output for connection to a second 2430GDAC-WARP or other G-Link-
compatible products.
•
Auto-detection of G-Link signal loss.
•
Operation with single-mode or multi-mode fiber optic cable.
•
SC/PC, ST/PC, or FC/PC fiber connector options.
•
Low power +12VDC operation.
GLink
Fiber In
GLink
Coaxial In
DIP Switch Control
Optical
S
Receiver
E
L
E
C
T
O
R
Cable
Equalizer
CPU
Figure 1-1: 2430GDAC-WARP block diagram
2430GDAC G-Link D to A Converter
Sync Generator
DVI
Video
Transmitter
Processor
Video DAC
Reclocker
Cable Driver
Fault Indication
Revision 1.2
HSYNC,
VSYNC
DVI-I Out
R, G, B
GLink
Coaxial Out
COM 1
2430GDAC-1
Advertisement
Table of Contents
