Table of Contents
Advertisement
1.
OVERVIEW
The 2430GDAC-MWP G-Link D to A Converter for MWP is a required component of Evertz MWP media
wall display systems. G-Link video signals from an MWP system are received over coaxial cable or fiber
optic cable, and are processed and converted into digital DVI and analog RGB video signals that can be
displayed on media walls composed of several individual displays. The converter features one G-Link
fiber optic input, one G-Link coaxial input, one reclocked G-Link coaxial output, and one DVI-I video
output.
Figure 1-1 details the operational structure of the device. The 2430GDAC-MWP has been
designed for use with the Evertz 3000MWP Media Wall Processors and Evertz 3000MVP Video
Monitoring Processors.
Features:
•
Single display resolution capability up to SXGA (1280x1024) at a 60Hz refresh rate.
•
Supports 1x4, 4x1, and 2x2 media wall displays.
•
DVI-I Digital and Analog video output.
•
Auto-detection of display resolution with manual override.
•
One reclocked G-Link coaxial output for connection to a second 2430GDAC-MWP or other G-Link-
compatible products.
•
Auto-detection of G-Link signal loss.
•
Operation with single-mode or multi-mode fiber optic cable.
•
SC/PC, ST/PC, or FC/PC fiber connector options.
•
Low power +12VDC operation.
GLink
Fiber In
GLink
Coaxial In
Optical
S
Receiver
E
L
E
C
T
O
R
Cable
Equalizer
CPU
DIP Switch Control
Figure 1-1: 2430GDAC-MWP Block Diagram
2430GDAC-MWP G-Link D to A Converter for MWP
Sync Generator
DVI
Video
Transmitter
Processor
Video DAC
Reclocker
Cable Driver
Fault Indication
Revision 1.1
HSYNC,
VSYNC
DVI-I Out
R, G, B
GLink
Coaxial Out
COM 1
2430GDAC-MWP-1
Advertisement
Table of Contents
