Table of Contents
Advertisement
For CPF300i
12.0.0 F
Soft Key on Dual Chart Page
OCUS
When Dual Chart is selected, you will notice one of the chart windows will have a red boarder
around it. This red boarder indicates which chart window the chart plotter has the Focus on,
meaning if the ShuttlePoint knob is moved the cursor on chart window will move. The focus
may be changed to to the other chart window with the procedure below:
1. Press any Soft Key. The Soft Key labels appear on the bottom of the screen. A [F
Soft Key will be shown.
2. Press [Focus]. A popup window appears where the active focus window label is
highlighted.
Figure 12.0.0a - Example of Dual Chart page with [F
3. Move the ShuttlePoint knob up and down to highlight the desired item and press [ENT].
The red boarder is moved to the focused window.
For CPF180i
12.0.1 Change Focus on Dual Chart Page
When Dual Chart is selected, you will notice one of the chart windows will have a red boarder
around it. This red boarder indicates which chart window the chart plotter has the Focus on,
meaning if the ShuttlePoint knob is moved the cursor on chart window will move. The focus
may be changed to to the other chart window with the procedure below:
1. Press and hold [FIND] for 2 seconds. The "red" boarder around the window is moved
from active window to the other.
Repeat the step 1. to move the focus from a window to another.
CPF180i and CPF300i
Figure 12.0.0 - Example of Dual Chart page with [F
] shown
OCUS
] window shown
OCUS
]
OCUS
Page 91
Advertisement
Table of Contents
