Table of Contents
Advertisement
Step 6
(continued)
USB
Use the USB bracket with cable to in-
stall it on the rear panel. The pin defi-
nitions of the USB pinheaders (posi-
tions in the white rectangle in the be-
low right figure) are shown in the table
below:
ATX Power
The 20-hole power plug (top right)
is connected to the ATX power 20-
pin pinheaders. The 4-hole 12V
power plug is inserted in the
ATX_12V power connector. The
plug from the power supply will
only insert in one orientation be-
cause of the different hole sizes.
Find the proper orientation and
push down firmly making sure that
the pins are aligned.
Advertisement
Table of Contents
