Install Expansion Cards - FIC P4-875P MAX User Manual

NOTE: Users The CPU installing procedures should be:
1. Insert the CPU (with its fansink and retention module) on the
socket.
2. Connect the 4-pin plug of the power supply
3. Connect the 20-pin plug of the power supply.
To remove the processor, please do it in reverse order.

4). Install Expansion Cards

This section describes how to connect an expansion card to one of your
system expansion slots.
Expansion cards are printed circuit boards that, when connected to the
mainboard, increase the capabilities of your system.
For example, expansion cards can provide video and sound capabilities. The
mainboard features one AGP and three PCI bus expansion slots.
CAUTION:
1.Make sure to unplug the power supply when adding or removing
expansion cards or other system components. Failure to do so
may cause severe damage to both the mainboard and expansion
cards.
2. Always observe static electricity precautions.
3. Please read Handling Precautions at the start of this manual.
Installation Procedures
2 - 7