Table of Contents
Advertisement
Step 5 - Install Add-on Card
1. Select an available expansion slot.
2. Remove the corresponding slot
cover from the computer chassis. Un-
screw the mounting screw that secures
the slot cover and pull the slot cover
out from the computer chassis. Keep
the slot cover mounting screw nearby.
3. Push the card firmly into the slot.
Push down on one end of the expan-
sion card, then the other. Use this rock-
ing motion until them card is firmly
seated inside the expansion slot. Se-
cure the card with the screw removed
in Step 2.
Step 6 - Connect Wires
5.1 Audio Channel
Please use the optional cable and A73
braket with cable to install the 5.1 au-
dio channel feature.
The pin
definitions of the
5.1audio channel
pinheaders
(position
in the white
rectangle
in the right figure)
are shown in right
table:
Advertisement
Table of Contents
