Table of Contents
Advertisement
Installation Procedures
Standard Power Connector: POWER
This 12-pin block connector is used for connecting to the standard 5V power
supply. In the picture below, notice that, in most cases, there are two marks P8
and P9 on the surface of the connector. You have to insert the P8 plug into the
P8 section of the connector, and so forth for P9. Two black wires must be in
the middle.
Printer Connector: PRINTER
This 26-pin male block connector is attached to your printer via a cable. When
inserting the cable, please be sure that the red line is always on the same side
as pin 1 of this connector.
45
Advertisement
Table of Contents
