Table of Contents
Advertisement
On-Chip Secondary PCI IDE
When enabled, it allows you to use the onboard secondary PCI IDE.
The options are: Enabled, Disabled.
IDE Secondary Master/Slave PIO
Allows an automatic or a manual configuration of the PCI secondary IDE
hard drive (master/slave) mode. The options are: Auto, Mode 0, Mode 1,
Mode 2, Mode 3, Mode 4.
IDE Secondary Master/Slave
Allows an automatic configuration of the PCI secondary IDE hard drive
(master/slave) mode if Ultra DMA is supported both on the motherboard
and the hard disk. The options are: Auto, Disabled.
*** On-Chip Serial ATA Setting ***
SATA Mode
This feature allows users to select SATA specifications that embeded func-
tions in South Bridge. The options are: IDE, RAID.
On-Chip Serial ATA
This feature allows users to select the SATA function modes (that embeded
in South Bridge). Setting at Disabled will disable STAT controller. Set at
Auto will allow the BIOS to arrange it. Setting Combined Mode will make
PATA and SATA combined. Max. of 2 IDE drives in each channel (primary
master/slave; secondary master/slave). Enhanced Mode allows max. of 6
IDE drives supported. SATA Only will make SATA operates in legacy mode.
The options are: Disabled, Auto, Combined Mode, Enhanced Mode, STAT
Only.
Serial ATA Port0/1 Mode
This feature allows users to select the SATA port 0/1 modes.
The options are: SATA0 master, SATA1 master.
UDMA
BIOS Setup
3 - 11
Advertisement
Table of Contents
