FIC P4-875P MAX User Manual page 58

Step 3 - Install Mainboard
Warning:
1. Excessive torque may damage the mainboard. When using
an electric screwdriver on the mainboard, make sure that the
torque is set to the allowable range of 5.0 ~ 8.0kg/cm.
2. Be aware of the shape edges in the case while installing
board.
1. Locate mounting holes on the
mainboard.
2. Place the board over the frame
inside the chassis.
Be sure that the board and frame are
aligned.
3. Affix the mainboard by copper
columns.