Install The Cpu - FIC P4-875P MAX User Manual

3). Install the CPU

The mainboard has built-in Switching Voltage Regulator to support CPU Vcore
autodetection. That is, It has the ability to detect and recognize the CPU volt-
age, clock, ratio and enables users to set up the CPU frequency from the BIOS
Setup Screen. Users can adjust the frequency through Frequency / Voltage
Control of the BIOS Setup Screen.
The procedures below shows you how to install your CPU and its fan
and heatsink. First of all, locate the CPU socket on this mainboard.
1. Swing the lever upword to 90 degree.
2. Install the CPU and make sure the the pin 1
orientation by aligning the socket corner marking
with the socket corner closest to the lever tip.
Do not insert the CPU by force. Make sure the
processor is fully inserted into the socket on all
sides.
Apply some thermal materials, such as paste or
tape, on the CPU top; and install a fan with
heatsink that approved by CPU manufacturer
to avoid CPU damage. For detail information,
please refer to the CPU manufacturer website.
Installation Procedures
2 - 5