FIC P4-875P MAX User Manual page 46

875 Dynasty Mainboard Manual
Wake-Up by PCI card
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM
controlled state. The options are Disabled, Enabled.
Power On by Ring
An incoming call via modem awakes the system from its soft-off mode.
The options are Disabled, Enabled.
Wake Up On LAN
When set at Enabled, an input signal comes from the other client/server on
the LAN awakes the system from a soft off state if connected over LAN.
The options are Disabled, Enabled.
USB KB Wake-Up From S3
When set at Enabled, it allows USB keyboard to activate the system from
ACPI S3 power saving mode. The options are Disabled, Enabled.
Resume by Alarm
This feature allows you to set the when the system being turned on from
the system power-off status. The options are: Enabled, Disabled.
Date (of Month) Alarm
This feature allows you to set the day of the alarm starts when the RTC
Alarm Resume From Soft Off is set to be Enabled. The options are: 0, 1..31.
Time (hh:mm:ss) Alarm
If an ATX power supply is installed and when RTC Alarm Resume is Enabled,
this feature allows you to set the time of the alarm starts when the RTC
Alarm Resume From Soft Off is set to be Enabled. The options are: hh
(hour) - 0, 1, 2,.., 23; mm (minute) - 0, 1, 2,..,59; ss (second) - 0, 1, 2,..,59.
Primary IDE 0
When the primary master HDD is working, the system timer will be re-
loaded and the system will not be into the suspend mode.
The options are: Disabled , Enabled.
3 - 16