Pnp/Pci Configurations - FIC P4-875P MAX User Manual

875 Dynasty Mainboard Manual

PnP/PCI Configurations

Reset Configuration Data
Enabling it to reset the system Extended System Configuration Data (ESCD)
when you exit Setup if you have installed a new add-on card and the
system reconfiguration has caused such a serious conflict that the operat-
ing system can not boot. The options are: Disabled, Enabled.
Resources Controlled By
If set at Auto, the BIOS arranges all system resources. If there exists con-
flict, select Manual. The options are: Auto (ESCD), Manual.
If the manual options, after the featrue IRQ Resources being pressed, of
IRQ- Assigned To are: PCI Device, Reserved. When resources were con-
trolled manually, assign each system interrupt a type, depending on each
device type to use the interrupt.
PCI/VGA Palette Snoop
Set this feature to be enabled if any ISA adapter card installed in the system
requires the VGA palette snoop function.
The options are: Disabled, Enabled.
3 - 18