Table of Contents
Advertisement
CPU Voltage Regulator
This item allows you to set the CPU Vcore voltage.
Options: 1.450V to 1.625 V in 0.025V increments. We recommend that
you leave this at the default value (with * mark).
AGP Voltage Regulator
This item allows you to set the AGP slot voltage.
Options: 1.5V to 1.8V in 0.1V increments.
We recommend that you leave this at the default value.
DIMM Voltage Regulator
This item allows you to set the DIMM slot voltage.
Options: 2.5V, 2.6V, 2.7V, 2.8V.
We recommend that you leave this at the default value.
Load Fail-Safe Defaults
This submenu is selected to diagnose the problem after the computer boots, if
the computer will not boot. These settings do not give optimal performance.
Load Optimized Defaults
This submenu is selected for default settings which provide the best system
performance.
Supervisor/User Password
To enable the Supervisor/User passwords, select the item from the Standard
CMOS Setup. You will be prompted to create your own password. Type your
password up to eight characters and press Enter. You will be asked to confirm
the password. Type the password again and press Enter. To disable password,
press Enter twice when you are prompted to enter a password. A message
appears, confirming the password is disabled.
BIOS Setup
3 - 21
Advertisement
Table of Contents
