Table of Contents
Advertisement
Installation Procedures
ATX Power Connector: ATX_PWR
This 20-pin male block connector is connected to the ATX power supply.
Standard Power Supply Connector: AT_PWR
This 12-pin block connector is used for connecting to the standard 5V power
supply. In the picture below, notice that, in most cases, there are two marks
" P8" and " P9" on the surface of the connector. You have to insert the
" P8" plug into the " P8" section of the connector, and so forth for " P9" . Two
black wires must be in the middle.
39
Advertisement
Table of Contents
