Table 5-2: Bios Options And Configured Usb Ports - IEI Technology KINO-DBT Series User Manual

Enabled
Disabled
USB SW1 [+5V DUAL]
Use the USB SW1 BIOS option to configure the USB power source for the corresponding
USB connector (Table 5-2).
+5V
+5V DUAL
USB SW2 [+5V DUAL]
Use the USB SW2 BIOS option to configure the USB power source for the corresponding
USB connector (Table 5-2).
+5V
+5V DUAL
BIOS Options
USB SW1
USB SW2

Table 5-2: BIOS Options and Configured USB Ports

XHCI Mode [Smart Auto]
Use the XHCI Mode BIOS option to configure the USB xHCI (USB 3.0) controller.
Enabled
Smart
Auto
Page 94
Power Saving Function support enabled
Power Saving Function support disabled
D
EFAULT
Set the USB power source to +5V
Set the USB power source to +5V dual
D
EFAULT
Set the USB power source to +5V
D Set the USB power source to +5V dual
EFAULT
Configured USB Ports
LAN1_USB1 (external USB 3.0 ports)
LAN2_USB2 (external USB 2.0 ports)
USB1, USB2 (internal USB 2.0 ports)
Enable the xHCI controller. USB 3.0 ports behave as
USB 3.0 ports.
D Allow the use of USB 3.0 devices prior to OS boot.
EFAULT
USB 3.0 ports function as USB 3.0 ports even during a
reboot.
KINO-DBT Mini-ITX SBC