Figure 4-9: Dual Usb Cable Connection - IEI Technology KINO-DBT Series User Manual

KINO-DBT Mini-ITX SBC
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the KINO-DBT USB connector.
Step 3: Insert the cable connectors. Once the cable connectors are properly aligned
with the USB connectors on the KINO-DBT, connect the cable connectors to the
on-board connectors. See Figure 4-9.

Figure 4-9: Dual USB Cable Connection

Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis.Step 0:
Page 61