Usb Configuration; Bios Menu 13: Usb Configuration - IEI Technology KINO-DBT Series User Manual

Mini-itx sbc with 22nm intel atom or celeron soc, dual gbe, ddr3, dvi, vga, displayport, usb 3.0, rs-232, rs-422, rs-485, sata 3g/s. and rohs
Hide thumbs Also See for KINO-DBT Series:
Table of Contents

Advertisement

KINO-DBT Mini-ITX SBC

5.3.9 USB Configuration

Use the USB Configuration menu (BIOS Menu 13) to read USB configuration
information and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
1 Keyboard, 3 Hubs
Legacy USB Support
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.

BIOS Menu 13: USB Configuration

USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system
Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support. Normally if this option is not enabled, any attached USB mouse or USB keyboard
does not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB
keyboard can control the system even when there is no USB driver loaded onto the
system.
Enabled
[Enabled]
D
Legacy USB support enabled
EFAULT
Enables Legacy USB
support. AUTO option
disables legacy support
if no USB devices are
connected. DISABLE
option will keep USB
devices available only
for EFI applications.
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+ -
Change Opt.
F1
General Help
F2
Previous Values
F3
Optimized Defaults
F4
Save & Exit
ESC
Exit
Page 89

Advertisement

Table of Contents
loading

Table of Contents