Table of Contents
Advertisement
KINO-DBT Mini-ITX SBC
4.2.1 SO-DIMM Installation
To install an SO-DIMM, please follow the steps below and refer to Figure 4-1.
Figure 4-1: SO-DIMM Installation
Step 1:
Locate the SO-DIMM socket on the solder side of the KINO-DBT. Place the
board on an anti-static mat.
Step 2:
Align the SO-DIMM with the socket. Align the notch on the memory with the
notch on the memory socket.
Step 3:
Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1)
Step 4:
Seat the SO-DIMM. Gently push downwards and the arms clip into place. (See
Figure 4-1)
4.2.2 PCIe Mini Card Installation
To install the PCIe Mini card, please refer to the diagram and instructions below.
NOTE:
The PCIe Mini card slot supports full-size and half-size PCIe Mini
cards. The following instruction diagrams take full-size cards as an
example to show users how to install. To install a half-size card, please
remove the corresponding retention screw.
Page 55
Advertisement
Table of Contents
