Introduction; Figure 1-1: Kino-Dbt Series - IEI Technology KINO-DBT Series User Manual

KINO-DBT Mini-ITX SBC

1.1 Introduction

Figure 1-1: KINO-DBT Series

The KINO-DBT series is a Mini-ITX form factor single bard computer. It has an on-board
22nm Intel® Atom™ or Celeron® processor, and supports two 204-pin 1333/1066 MHz
dual-channel unbuffered DDR3 Low Voltage (DDR3L) SDRAM SO-DIMM with up to
8.0 GB of memory.
The KINO-DBT series includes one VGA port and one DVI port for dual independent
display. It also has an internal DisplayPort (iDP) connector supporting HDMI, DVI, VGA,
LVDS and DP monitors through the IEI converter boards. Expansion and I/O include one
PCIe x4 slot (with PCIe x1 signal), one PCIe Mini slot supporting mSATA modules, two
USB 3.0 ports plus two USB 2.0 on the rear panel, four USB 2.0 by pin header, two SATA
3Gb/s connectors, five RS-232 serial ports, and one RS-422/485 connector.
Page 2