Usb Cable Connection; Figure 4-8: Sata Drive Cable Connection - IEI Technology KINO-DBT Series User Manual

Step 2: Insert the cable connector. Insert the cable connector into the on-board SATA
drive connector and the SATA power connector. See Figure 4-8.

Figure 4-8: SATA Drive Cable Connection

Step 3: Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 4-8.
Step 4: To remove the SATA cable from the SATA connector, press the clip on the
connector at the end of the cable.

4.4.2 USB Cable Connection

The KINO-DBT is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
Page 60
KINO-DBT Mini-ITX SBC