Figure 4-2: Pcie Mini Card Retention Screw Removal; Figure 4-3: Pcie Mini Card Installation (Full-Size) - IEI Technology KINO-DBT Series User Manual

Step 1: Locate the PCIe Mini card slot. Remove the preinstalled retention screw on the
screw pillar of the PCIe Mini card slot as shown in (

Figure 4-2: PCIe Mini Card Retention Screw Removal

Step 2: Line up the notch on the PCIe Mini card with the notch on the connector. Slide
the PCIe Mini card into the socket at an angle of about 20º.
Step 3: Push the other end of the PCIe Mini card down and secure the card with the
previously removed retention screw (

Figure 4-3: PCIe Mini Card Installation (Full-size)

Page 56
KINO-DBT Mini-ITX SBC
F igure 4-2).
5
F igure 4-3).
5