Web Dial; Mcast - New Rock Technologies NRP1012 User Manual

NRP1012 Series IP Phone

5.6.6 Web Dial

This function enables you to make a call through the Web page. After inputting the phone number and
select a line, you can call out by clicking Dial. To terminate a call, click Hangup.
Figure 5-24 Wed dial setting interface

5.6.7 MCAST

Figure 5-25 MCAST interface
Use the multicast function to send notice to every member of the multicast is simple and easy. By
setting the multicast key on your phone, you can send multicast RTP flow to the pre-configured
multicast address. By listening multicast address is configured on the phone, listen and play the
multicast address to send the RTP stream.
Send multicast setting
On the phone web page, function key-function key, set a function key，as shown
New Rock Technologies, Inc.
User Manual
5-39