Connecting To The Power Outlet; Basic Initialization; Network Settings - New Rock Technologies NRP1012 User Manual

User Manual
For detailed settings, see 2.2.1 Network Settings.

2.1.2 Connecting to the Power Outlet

Prior to the configuration, make sure that the power connector matches the power outlet, and both the
voltage and electric current are comply with the requirement.
Plug the direct current (DC) connector of the power adapter into the DC 5V port in the rear of the

NRP1012/P.
Plug the alternating current (AC) connector of the power adaptor into the power outlet and start

the NRP1012/P up.
You can view the system progress and the INITIALIZING prompt on the screen. After the

startup, you can view the current date, system time, and device model on the screen of the
NRP1012/P.
You can configure your account and make phone calls after the NRP1012/P is registered to a

server

2.2 Basic Initialization

NRP1012/P provides a plenty of functions and parameters for configuration. To make a proper
configuration, you need to know basic information about the network and Session Initiation Protocol
(SIP) to understand the meanings of each parameter. To help you enjoy the high-quality VoIP services
with low costs, this chapter describes items must be configured, making the configuration easy and
intuitive...

2.2.1 Network Settings

Prior to the configuration, make sure that the Internet broadband connection is normal and the hardware
is properly connected. The factory network mode of the NRP1012/P is DHCP, allowing the
NRP1012/P to access the network as long as there is a DHCP server. If there is no DHCP server
available, you need to change the network mode of the NRP1012/P to Static IP or PPPoE according to
the network type.
PPPOE mode (for dial-up ADSL)
Step1 Obtain the PPPoE account and password.
Step2 Press Menu -> Settings -> Advanced Settings and enter the password. Choose Network ->
WAN settings -> Connection Mode. Then, choose PPPoE through navigation keys and press
Save.
Step3 Press Back to return to the parent menu, choose PPPoE Setting, and press Enter.
2-2
NRP1012 Series IP Phone
www.newrocktech.com