Related Manuals for New Rock Technologies NRP1004 Series
Summary of Contents for New Rock Technologies NRP1004 Series
- Page 1 New Rock Technologies, Inc. NRP1004 Series IP Phone User Manual NRP1004 NRP1004/P http://www.newrocktech.com/index_E.asp Email: gs@newrocktech.com MSN: newrock.gs@hotmail.com Skype: newrock.gs...
- Page 2 Safety Notices Please read the following safety notices before installing or using this phone. They are crucial for the safe and reliable operation of the device. Please use an external power supply that is included in the package. Other power supplies may cause damage to the phone, affect the behavior or induce noise.
-
Page 3: Table Of Contents
Contents 1 Introduction ..............................1-1 1.1 Appearance of an IP Phone ..........................1-1 1.2 Icon Description ..............................1-3 1.3 LED Indicator ..............................1-3 1.4 Hardware Specifications ............................ 1-4 1.5 Character Mapping Table ..........................1-5 2 Initial Connection and Settings ........................ - Page 4 3.3.5 Auto Redial ............................. 3-9 3.3.6 Call Complete ............................3-9 3.3.7 Headset Ringing ............................. 3-9 3.3.8 Power Light ............................. 3-9 3.3.9 Hide DTMF ............................. 3-9 3.3.10 Password Dial ............................. 3-10 3.3.11 Pre Dial ............................... 3-10 4 Phone Settings ............................
- Page 5 5.6.4 Contact ..............................5-36 5.6.5 Remote Contact ............................ 5-39 5.6.6 Web Dial ............................... 5-40 5.6.7 MCAST ..............................5-40 5.7 Function Key ..............................5-43 5.7.1 Function Key ............................5-43 5.7.2 EXT KEY .............................. 5-44 ...
- Page 6 Contents of Figure Figure 1-1 Appearance of an IP Phone ........................1-1 Figure 5-1 Login interface ............................5-2 Figure 5-2 Status interface ............................5-2 Figure 5-3 Wizard interface ............................5-3 Figure 5-4 Static IP settings interface ........................5-4 ...
- Page 7 Contents of Table Table 1-1 Keypad description ..........................1-1 Table 1-2 Connection port description ........................1-2 Table 1-3 Icon description ............................1-3 Table 1-4 Programmable key LED indicator status for BLF ..................1-3 Table 1-5 Programmable key LEDs for Presence ....................1-4 ...
-
Page 9: Introduction
NRP1004 Series IP Phone User Manual Introduction 1.1 Appearance of an IP Phone Figure 1-1 Appearance of an IP Phone Table 1-1 Keypad description Name Description Executes different functions with different softkeys, such as Soft key 1/2/3/4 /DND/Menu/Del/Redial/Send/ PBook Quit/Answer/Reject/Hold/Transfer/Conf and so on. - Page 10 User Manual NRP1004 Series IP Phone Name Description Dials the last call number when the IP phone is in the hook off/hands-free mode. Checks the outgoing call when the IP phone is in the stand-by mode. Redial/Send Finds a specific contact in the phone book/call records and ...
-
Page 11: Icon Description
NRP1004 Series IP Phone User Manual Port Name Description Earpiece Port type: RJ-9 connector 1.2 Icon Description Table 1-3 Icon description Icon Description Call out Call in Call hold Auto answer Mute Contact Do not Disturb (DND) Hand-free Hook Headset... -
Page 12: Hardware Specifications
User Manual NRP1004 Series IP Phone Table 1-5 Programmable key LEDs for Presence LED Status Description Steady green The object is online. Slow blinking red The object is ringing. Steady red The object is active. The object is failed./No subscribed. -
Page 13: Character Mapping Table
NRP1004 Series IP Phone User Manual 1.5 Character Mapping Table Table 1-9 Mapping relation between the keypad and character Keypad Character Keypad Character 7 P Q R S p q r s 2 A B C a b c 8 T U V t u v... -
Page 15: Initial Connection And Settings
NRP1004 Series IP Phone User Manual Initial Connection and Settings 2.1 Power and Network Connections 2.1.1 Connecting to a Network Prior to the configuration, make sure that broadband Internet access services are available in the current environment. With a broadband router Establish connections between the network hardware by connecting one end of the network cable to the WAN port of the IP phone and the other end to the LAN port of your broadband router. -
Page 16: Connecting To The Power Outlet
User Manual NRP1004 Series IP Phone For detailed settings, see 2.2.1 Network Settings. 2.1.2 Connecting to the Power Outlet Prior to the configuration, make sure that the power connector matches the power outlet, and both the voltage and electric current are comply with the requirement. - Page 17 NRP1004 Series IP Phone User Manual Step4 Press Del to delete the current information displayed on the screen, enter the username and password, and press Save. Step5 Press Back six times to return to the stand-by screen. Step6 Check the status. If the screen shows “Negotiating…”, the NRP1004/P is trying to access the PPPoE Server;...
-
Page 19: Phone Function
NRP1004 Series IP Phone User Manual Phone Function 3.1 Basic Function 3.1.1 Making a Call Call Device You can make a phone call via the following modes: If you pick up the handset, the icon will display in the upper left corner of the screen. -
Page 20: Call Forward
User Manual NRP1004 Series IP Phone 3.1.4 Call Forward This function forwards an incoming call to another phone. Once this function is enabled, the icon displays in the upper right corner of the screen. The status of the call forwarding includes: ... -
Page 21: Three-Way Conference Call
NRP1004 Series IP Phone User Manual Attended Transfer To make an attended transfer, press the Transf key, enter the number to transfer to, and press SEND during the conversion. After the third party answers, press Transf to complete the operation. Note that to enable this function, you need to enable call waiting and call transfer first. -
Page 22: Advanced Function
User Manual NRP1004 Series IP Phone 3.2 Advanced Function 3.2.1 Call Pickup Call pickup is implemented by simulating the pickup function of private branch exchange (PBX). That is, when A calls B, but B does not answer for the moment, C can thus pick up the phone and answer the call after inputting the specified prefix code and B’s number. -
Page 23: Click To Dial
NRP1004 Series IP Phone User Manual 3.2.4 Click to Dial When browsing in an appointed Web page, user A can click to call user B via a link (this link to user B), then user A’s phone will ring, after A hooks off, the phone will dial to B. -
Page 24: Ping
User Manual NRP1004 Series IP Phone number of the voice mail… Press Save to save the configuration. Press Voicemail to check the voice mail. Then, press Dial to call the voice mail number. After the connection is established, you need to enter the password to check voice messages. - Page 25 NRP1004 Series IP Phone User Manual unread messages. Call park: When the call park is enabled, you need to set a server number. If you feel inconvenient to answer a call in a place, you can press the key to transfer the call to the server number.
-
Page 26: Other Functions
User Manual NRP1004 Series IP Phone Setting the key as a DTMF key You can configure the key as a DTMF key. This key function allows you to dial a preset number or enter the number during the conversation. Setting the key as a URL key This function requires you to configure a XML Phonebook address. -
Page 27: Dial Peer
NRP1004 Series IP Phone User Manual 3.3.4 Dial Peer Press Menu > Features > Enter > Dial Peer > Enter. Press Add and input the number and destination in the page displayed. For example: the number is 1 and the destination is 1234. Then, press Save. -
Page 28: Password Dial
User Manual NRP1004 Series IP Phone 3.3.10 Password Dial Press Menu > Features > Enter > Password Dial > Enter. Enable this function using the navigation key. After that, you can also set Prefix and Length of the password. -
Page 29: Phone Settings
NRP1004 Series IP Phone User Manual Phone Settings 4.1 Basic Settings 4.1.1 Keyboard Press Menu > Settings > Enter > Basic Settings > Enter > Keyboard > Enter. You can set the DSS key settings, Programmable keys, Desktop Long Pressed, Soft Key as needed. -
Page 30: Language
User Manual NRP1004 Series IP Phone 4.1.7 Language Press Menu > Settings > Enter > Basic Settings > Enter > Language > Enter. Choose the language using the navigation keys. The default two languages are English and Chinese. -
Page 31: Web Page Setting
NRP1004 Series IP Phone User Manual Web Page Setting 5.1 Configuration Introduction 5.1.1 Configuration Methods Users with different using habits can configure the NRP1004/P by means of: Phone keypad Web browser (recommended) Telnet with CLI command 5.1.2 Password Configuration The browser and command lines of the phone can be set in either of the two modes: guest mode and administrator mode. -
Page 32: Basic Configuration
User Manual NRP1004 Series IP Phone Figure 5-1 Login interface After configuring the IP phone, you need click Save in the config tag of Maintenance to save your modification. Otherwise, the phone restores the configuration before modification after reboot. 5.3 Basic Configuration 5.3.1 Status... -
Page 33: Wizard
NRP1004 Series IP Phone User Manual Table 5-1 Status parameters Name Description Contains configuration information about the WAN and LAN ports, including the port Network connection mode (static, DHCP, or PPPoE), MAC address, IP address, IP gateway, and status (Enabled or Disabled) of the DHCP service and bridge mode. - Page 34 User Manual NRP1004 Series IP Phone Figure 5-4 Static IP settings interface Table 5-2 Static IP settings parameters Name Description IP Address Inputs the IP address distributed to you. Subnet Mask Inputs the subnet mask distributed to you. IP Gateway Inputs the gateway address distributed to you.
- Page 35 NRP1004 Series IP Phone User Manual Name Explanation Authentication Inputs the password for SIP registration. Password SIP User Inputs the phone number registered to the SIP server. Enable Enable/disable registration. Registration Click Next to display detailed configuration information just set.
-
Page 36: Call Log
User Manual NRP1004 Series IP Phone Table 5-4 PPPoE settings parameters Name Description Inputs the name of a PPPoE server. If the PPPOE service provider has no special Server Name requirements , you can use the default value. User Inputs your ADSL account. -
Page 37: Language
NRP1004 Series IP Phone User Manual 5.3.4 Language Figure 5-8 Language setting interface Table 5-6 Language parameters setting Name Description Language Sets the language of the phone. The default language is English. Sets the greeting words to be displayed on LCD screen. -
Page 38: Network
User Manual NRP1004 Series IP Phone 5.4 Network 5.4.1 WAN Figure 5-9 WAN setting interface Table 5-7 WAN parameters setting Name Description WAN Status Active IP Address Specifies the current IP address of the phone. Current Subnet Specifies the subnet mask of the phone. -
Page 39: Lan
NRP1004 Series IP Phone User Manual Name Description Indicates whether to enable the DHCP mode. If you choose this mode, the phone can DHCP obtain the network-related information automatically from the DHCP server automatically, and no action is required. Indicates whether to enable PPPoE mode. If you choose this mode, you need to input PPPoE the ADSL account and password. -
Page 40: Qos & Vlan
User Manual NRP1004 Series IP Phone Name Description Enables the DHCP server of the LAN port. If you modify the LAN IP address, the phone will automatically modify contents in the DHCP Lease Table according to the IP DHCP Service address and subnet mask, and then save the modification. -
Page 41: Service Port
NRP1004 Series IP Phone User Manual Table 5-9 QoS & VLAN parameters setting Name Description Link Layer Discovery Protocol (LLDP) Settings Enable LLDP Enables the LLDP function. Package Specifies the interval at which LLDP packets are sent, in seconds. The default value is Interval(1-3600) Enables the LLDP Learn function. - Page 42 User Manual NRP1004 Series IP Phone Figure 5-12 Service port setting interface Table 5-10 Service port parameters setting Name Description Service Port Settings Web Server Type Sets a web service protocol. The value can be HTTP or HTTPS. Sets a Web browser port. The default port number is 80. To increase the system safety, you are recommended to change the port to a non-80 standard port, and save the configuration.
-
Page 43: Dhcp Server
NRP1004 Series IP Phone User Manual 5.4.5 DHCP Server Figure 5-13 DHCP server setting interface Table 5-11 DHCP server parameters setting Name Description Lists the IP address and MAC address allocated through DHCP. If the LAN port of the DHCP Client... -
Page 44: Time&Date
User Manual NRP1004 Series IP Phone Name Description Subnet Mask Sets the subnet mask of the lease table. IP Gateway Sets the default IP gateway of the lease table. DNS Server Sets the default IP address of the DNS server of the lease table. Click Add to add Address entries to the lease table. - Page 45 NRP1004 Series IP Phone User Manual Figure 5-14 TIME&DATE setting interface Table 5-12 TIME&DATE parameters setting Name Description Simple Network Time Protocol (SNTP) Settings Enable SNTP Enables SNTP. Enable DHCP Enables DHCP Time so that the phone will automatically synchronize the standard Time time.
-
Page 46: Voip
User Manual NRP1004 Series IP Phone Name Description Offset Sets the variety length. Month Sets the start and end month. Week Sets the start and end week. Sets the start and end day. Hour Sets the start and end hours. - Page 47 NRP1004 Series IP Phone User Manual Figure 5-15 SIP setting interface New Rock Technologies, Inc. 5-17...
- Page 48 User Manual NRP1004 Series IP Phone Table 5-13 SIP parameters setting Name Description SIP Line In this part, you can choose one of the four SIP lines and configure a SIP account for it. Basic Settings Status Indicates whether the phone is registered to the SIP server. Available values include Applied and Unapplied.
- Page 49 NRP1004 Series IP Phone User Manual Name Description Specifies the IP address of a proxy server. (Usually, the SIP service provider provides a server with configurations of the proxy server and registration server being identical. Proxy Server If configurations (such as the IP address) of the proxy server and registration server are Address different, you need to make modifications as needed.
- Page 50 User Manual NRP1004 Series IP Phone Name Description Auto Answer Sets the timeout period for the phone to automatically answer the incoming call. For Timeout example, if the value is set to 60, the phone will automatically answer the call that is not answered within 60 seconds.
- Page 51 NRP1004 Series IP Phone User Manual Name Description Keep Alive Type Sets the keep alive type. If the value is set to Option, the phone will send an option SIP message at a set interval, and the server will send “200OK” in response. If the value is set to UDP, the phone will send a UDP message at a set interval to the server.
- Page 52 User Manual NRP1004 Series IP Phone Name Description Enable Display Quotes the display name in output signaling message for server compatibility. name Quote Enable Enables the invite sip message to contain the user=phone field for server user=phone compatibility. Click to talk Enables the click to Talk function.
-
Page 53: Iax2
NRP1004 Series IP Phone User Manual 5.5.2 IAX2 Figure 5-16 IAX2 setting interface Table 5-14 IAX2 parameters setting Name Description Status Indicates whether the phone has been registered to the IAX2 server. The value can be Applied or Unapplied. Server Address Specifies the IP address of the IAX2 server. -
Page 54: Stun
User Manual NRP1004 Series IP Phone Name Description Enables the IAX2 server to support echo test, a function to check whether the communication initiated by a terminal to a selected platform is normal. If the value is Echo Test set to Enabled, the echo test number is in text format, the phone uses the echo test Number number to replace the echo test text.. -
Page 55: Dial Peer
NRP1004 Series IP Phone User Manual Name Description Server Port Sets the port of a SIP STUN server. Sets the interval at which the STUN server identifies the NAT type. If the NAT server Blinding Period finds that a NAT mapping is idle after a certain period of time, it will release the mapping. - Page 56 User Manual NRP1004 Series IP Phone numbers. Square brackets []” are added to specify the value range. It may be a range, a list of ranges “ separated by commas, or a list of digits. If a user dials 11 digit numbers started from 135 to 139, the phone will automatically add 0 before the dialed numbers.
- Page 57 NRP1004 Series IP Phone User Manual The following describes how to configure the dial peer table to achieve the configuration of multiple accounts simultaneously: 9T indicates that if the phone is configured with a SIP1 server and has been registered to the server, all users attempting to make phone calls through the SIP1 server need to add 9 before the phone number.
- Page 58 User Manual NRP1004 Series IP Phone Step match line information, comparing the selected dial-up line is a line in the table and dialpeer is the same, if the same, continue down the match, otherwise the next query. The third step is for a prefix or exact match.
-
Page 59: Phone
NRP1004 Series IP Phone User Manual Set by web Description Example When you dial The phone will automatically send out “8309“, the number alias number adding your dialed number, that the SIP1 server if your dialed number starts with your set receives is phone number. -
Page 60: Feature
User Manual NRP1004 Series IP Phone Table 5-18 Audio setting parameters Name Description First Codec Specifies the first preferential DSP codec. The value can be G.711A/u, G.722, G.723.1, 726-32 G.729AB, or None. Second Codec Specifies the second preferential DSP codec. The value can be G.711A/u, G.722, G.723.1,726-32 G.729AB, or None. - Page 61 NRP1004 Series IP Phone User Manual Figure 5-20 Feature setting interface New Rock Technologies, Inc. 5-31...
- Page 62 User Manual NRP1004 Series IP Phone Table 5-19 Feature parameters setting Name Description DND (Do Not Enables the phone to reject any incoming call and prompt the caller that the phone is Disturb) busy. The outgoing call of the phone is not affected.
- Page 63 NRP1004 Series IP Phone User Manual Name Description Auto Redial Sets the auto redial times of the phone. Times Hide DTMF Specifies the hide DTMF mode. Ring From Enables Ring From Handset by selecting it, the phone plays ring tone from handset.
-
Page 64: Dial Plan
User Manual NRP1004 Series IP Phone Name Description Block out Sets the Add/Delete Limit List. Please input the prefix of the phone numbers that you forbid the phone to dial. For example, if you want to forbid to dial the phones with prefix 001, you need to input 001 in the blank of limit list, and then you cannot dial any of these phone numbers with prefix 001. - Page 65 NRP1004 Series IP Phone User Manual Figure 5-21 Dial plan setting interface Table 5-20 Dial plan parameters setting Name Description Basic Setting Press "#" to Send Indicates that you need to press # after dialing a number. Dial Fixed Length Indicates that the phone will automatically call out after the number with a specified length is dialed.
-
Page 66: Contact
User Manual NRP1004 Series IP Phone Name Description Below is user-defined digital map rule: [] Specifies a range that will match digit. May be a range, a list of ranges separated by commas, or a list of digits. * Match any single digit that is dialed. - Page 67 NRP1004 Series IP Phone User Manual Figure 5-22 Contact setting interface Table 5-21 Contact parameters setting Name Description Phonebook Table Name Displays the number of the incoming call in the form of contact name on the LCD screen. Shows the detail of the current phonebook.
- Page 68 User Manual NRP1004 Series IP Phone Name Description Office Number Specifies the office number. Mobile Number Specifies the mobile number. Other Number Specifies the other number. Ring Type Specifies a ring type for the incoming calls. Line Specifies the sip line for each number.
-
Page 69: Remote Contact
NRP1004 Series IP Phone User Manual 5.6.5 Remote Contact Figure 5-23 Rremote Contact setting interface In this page, you can configure an address for the XML phonebook address. After that, you can directly access the corresponding remote phonebook after pressing the remote contact key on the phone. -
Page 70: Web Dial
User Manual NRP1004 Series IP Phone 5.6.6 Web Dial This function enables you to make a call through the Web page. After inputting the phone number and select a line, you can call out by clicking Dial. To terminate a call, click Hangup. - Page 71 NRP1004 Series IP Phone User Manual Value format IP:Port，the IP address of multicast is range from 224.0.0.0 to 239.255.255.255,port is greater than 1024 If multicast codec is G722, the LCD screen will displays "HD", which means the phone is sending...
- Page 72 User Manual NRP1004 Series IP Phone Enable Page Priority Page priority determines the phone how to handle the newly received multicast RTP stream when in a multicast session. Enabled page priority, the phone will automatically ignore the low priority multicast RTP stream and receive the high priority multicast RTP stream and hold the current multicast session;...
-
Page 73: Function Key
NRP1004 Series IP Phone User Manual 5.7 Function Key 5.7.1 Function Key Figure 5-26 Function Key interface New Rock Technologies, Inc. 5-43... -
Page 74: Ext Key
User Manual NRP1004 Series IP Phone Table 5-23 Function Key parameters setting Name Description Screen Configuration Contrast Sets the contrast of the screen. Enable Backlight Turns the backlight on or off. Line Key Settings In this part, you can set the Line: select Auto, SIP1, SIP2 or IAX2 in function key type. After you set it, you pick up handset or hands-free, press this function key, and then you can use the corresponding SIP line. -
Page 75: Sofykey
NRP1004 Series IP Phone User Manual Figure 5-27 EXT KEY interface 5.7.3 Sofykey You can configure different functions for each softkey in the screen interface. New Rock Technologies, Inc. 5-45... - Page 76 User Manual NRP1004 Series IP Phone Figure 5-28 Softkey setting interface 5-46 www.newrocktech.com...
-
Page 77: Maintenance
NRP1004 Series IP Phone User Manual 5.8 Maintenance 5.8.1 Auto Provision Figure 5-29 Auto provision setting interface The NRP1004/P supports PnP, DHCP, and Phone Flash to obtain the parameters. After PnP, DHCP, and Phone Flash are all deployed, the terminal goes through the following process to obtain the server address and other parameters when it boots up: ... - Page 78 User Manual NRP1004 Series IP Phone Table 5-24 Auto provision parameters setting Field name Explanation Auto Update Setting Current Config Specifies the version of the current configuration file. If the version of the CFG Version configuration file downloaded is the same as same as that of the running one, the system does not enable auto provision.
-
Page 79: Syslog
NRP1004 Series IP Phone User Manual Field name Explanation Specifies different update modes: Update Mode 1. Disable 2. Update after reboot 3. Update at time interval TR069 Settings Enable TR069 Enables TR069. ACS Server Type Specifies the type of an ACS server. - Page 80 User Manual NRP1004 Series IP Phone Figure 5-30 Syslog setting interface Table 5-25 Syslog parameters setting Name Description Syslog Settings Server Address Specifies the IP address or domain name of the Syslog server. Server Port Specifies the port of the Syslog server.
-
Page 81: Config
NRP1004 Series IP Phone User Manual 5.8.3 Config Figure 5-31 Config setting interface Table 5-26 Congif parameters setting Name Description Save Saves the current configuration. Configuration Note: You can save all changes of configurations. Click the Save button, all changes of configuration will be saved, and become effective immediately. - Page 82 User Manual NRP1004 Series IP Phone Figure 5-32 Update setting interface Table 5-27 Update parameters setting Name Description Web Update Updates the Web page. You can click the Browse button, find out the configuration file saved before or provided by manufacturer, and download the configuration file to Web Update the phone Alternatively, you can download the update system file of the phone .
-
Page 83: Access
NRP1004 Series IP Phone User Manual Name Description Type Specifies the update type. The value can be: 1. Application update: downloads the system update file. 2. Config file export: uploads the configuration file to the FTP/TFTP server, name and save it. -
Page 84: Reboot
User Manual NRP1004 Series IP Phone Table 5-28 Access parameters setting Name Description Keyboard Sets the password for entering the setting menu of the phone through the phone‘s key Password board. The password is digit. Keyboard Lock Settings User Sets the account user name. -
Page 85: Security
NRP1004 Series IP Phone User Manual 5.9 Security 5.9.1 Web Filter Figure 5-35 Web filter interface In this page, you can configure devices in a certain IP address segment to access the MMI of the phone for configuration and management. - Page 86 User Manual NRP1004 Series IP Phone Figure 5-36 Firewall setting interface Table 5-30 Firewall parameters setting Name Description Firewall Type Enable Input Enables the application of input rules on the firewall. Rules Enable Output Enables the application of output rules on the firewall.
-
Page 87: Nat
NRP1004 Series IP Phone User Manual Name Description Deletes an input or output rule as needed. 5.9.3 NAT NAT Settings Net Address Translation (NAT) is an IP address translation (IP address mapping) protocol. It is used to transform the private IP address and port to public IP address and port. -
Page 88: Vpn
User Manual NRP1004 Series IP Phone Name Description Application Layer Gateway (ALG) Settings PPTP ALG Enables/disables point-to-point tunneling protocol (PPTP) ALG. By default, PPTP ALG is enabled. NAT Table Option Transfer Type Specifies the type of the protocol for NAT mapping, TCP or UDP... -
Page 89: Security
NRP1004 Series IP Phone User Manual Name Description Selects L2TP. You can choose only one for current state. After you select it, you’d better save the configuration and reboot your phone. Enable VPN Enable or disable VPN. Layer 2 Tunneling Protocol (L2TP) VPN Server Specifies the IP address of a VPN L2TP server. -
Page 90: Logout
User Manual NRP1004 Series IP Phone 5.10 Logout You can quit the Web page by clicking Logout. For the next access, you need to input the username and password again. Figure 5-40 Logout setting interface 5-60 www.newrocktech.com... -
Page 91: Appendix
NRP1004 Series IP Phone User Manual Appendix 6.1 Voice Features The NRP1004/P can provide the following voice features: Two SIP servers SIP 2.0 (RFC 3261) and the corresponding RFCs IAX2 Three SIP lines (users can simultaneously register to three SIP server and choose any one of them to carry out call-in and call-out services) ... -
Page 92: Network Features
User Manual NRP1004 Series IP Phone Code synchronization via IP PBX/IMS Dialup via web phone book Voice codec setting for each SIP line Keypad lock, and emergency call during the keypad lock Customized logo ... - Page 93 NRP1004 Series IP Phone User Manual Auto provisioning (automatic configuration update and system maintenance) www.newrocktech.com...