New Rock Technologies NRP1012 User Manual page 25

NRP1012 Series IP Phone
you monitor the status (idle, ringing, or busy) of other SIP account. For information about the
LED status, see 1.3 LED Indicator.
Note: In the Web interface, you can also set the pickup number to activate the pickup function. For
example, if you set the BLF number to 212, and the pickup number to 189, when there is an
incoming call to 212, you can press the BLF key to pick up the incoming call of 212. Note that to
enable the BLF function, you need to input *8 in the pickup number of the Web page.
Presence: In addition to subscribe the object status, this function can check whether object online.

Note: You can subscribe either the BLF or presence information of the same number.
MWI: When the key is configured with the MWI function, you can press this key to quickly check

unread messages.
Call park: When the call park is enabled, you need to set a server number. If you feel inconvenient

to answer a call in a place, you can press the key to transfer the call to the server number. Then,
you can change a place and input the server number to recover the call.
Setting the key as a Line key
You can set these keys to line keys. Pressing these key will enter the dialer interface.
Setting the key as a Key Event
You can set the function type of these keys to Key Event, with multiple sub-type options available.
Choose any of the following functions for the key.
None

MWI

DND

Hold

Transfer

Phone Book

Redial

Pick up

Join

Auto-redial-on

Auto-redial-off

Call Forward

History

Flash

Memo

Headset

Release

New Rock Technologies, Inc.
User Manual
3-7