Ban Outgoing; Dial Plan; Dial Peer; Auto Redial - New Rock Technologies NRP1012 User Manual

NRP1012 Series IP Phone
can receive anonymous calls.

3.3.3 Ban Outgoing

Press Menu -> Features -> Ban Outgoing -> Enter.

Enable or disable this function using the navigation keys
you cannot call any number.

3.3.4 Dial Plan

Press Menu -> Features -> Enter -> Dial Plan -> Enter.

Available plan include: Pressing # to send, Timeout to send, Timeout, Fixed Length Number,

Press # to Do BXFER, BXFER On Onhook, AXFER On Onhook. You can enable or disable each
dial plan using the navigation keys

3.3.5 Dial Peer

Press Menu -> Features -> Enter -> Dial Peer -> Enter.

Press Add and input the number and destination in the page displayed. For example: the number is

1 and the destination is 1234. Then, press Save.
Input 1# in the dial interface, you call the number 1234 in speed dial mode.


3.3.6 Auto Redial

Press Menu -> Features -> Enter -> Auto Redial -> Enter.

Enable the auto redial function using the navigation keys

set values for Interval and Times, and then press Save.
After auto redial is enabled, if the callee does not answer your call for the moment, you are

prompted whether use the auto redial function. If you press OK, the phone will call out the callee
according the Interval and Times you set.

3.3.7 Call Complete

Press Menu -> Features -> Enter -> Call Complete -> Enter.

Enable this function using the navigation keys

If the callee does not answer your call for the moment, the phone prompts you "Call Complete

Waiting number?" Press OK. When in the callee becomes idle, the phone prompts you "Call
Complete Waiting number?" (in 30s). If you press OK, the phone will call out the number
automatically.

3.3.8 Headset Ringing

Press Menu -> Features -> Enter ->Headset Ringing -> Enter.

New Rock Technologies, Inc.
and .
and .
and . If you choose Enabled,
and . If you choose Enabled,
User Manual
3-9