New Rock Technologies NRP1012 User Manual page 49

NRP1012 Series IP Phone
Name
Proxy Server
Address
Proxy Server Port
Proxy User
Proxy Password
Backup Server
Address
Backup Server
Port
Server Name
Codecs Settings
Disable
Codecs/Enable
Codecs
Advanced SIP Settings
Forward Type
Forward Number
No Ans.
Wait Time
Transfer Timeout
Enable Hotline
Hotline Number
Warm Line Wait
Time
BLF Server
SIP Encryption
SIP Encryption
Key
RTP Encryption
RTP Encryption
Key
Enable Auto
Answer
New Rock Technologies, Inc.
Description
Specifies the IP address of a proxy server. (Usually, the SIP service provider provides
a server with configurations of the proxy server and registration server being identical.
If configurations (such as the IP address) of the proxy server and registration server are
different, you need to make modifications as needed.
Specifies the signaling port of the SIP proxy server.
Specifies the account of the SIP proxy server.
Specifies the password of the SIP proxy server.
Specifies the IP address of the backup server. I If the IP address of the primary server
is unavailable, the phone will use the backup server address.
Specifies the port of the backup server.
Adds or deletes codecs, and changes the codecs priority through the navigation keys.
Specifies the call forward mode. By default, call forward is disabled.
Disabled: disables call forward.
Busy: forwards the call to a specified number if the phone is busy.
No answer: forwards the call not answered within the specified time to a specified
number.
Always: forwards all incoming calls to a specified number under any conditions.
The phone will prompt you of the incoming before carrying out the forwarding
operation.
Specifies the number the incoming call will be forwarded to.
Fwd Forwards the incoming call to a specified number at a certain delay in the scenario
where the forward type is set to No answer and the, incoming call is not answered in
time.
For the phone supports the transfer of certain special features server, set interval time
between sending "bye" and hanging up after the phone transfers a call.
Enables the hot line function.
Sets a hot line number for the phone to dial automatically after the handset is picked up
for a certain period of time.
Sets the hot line delay time.
Sets this parameter if your server does not support subscription package to separates
the registration server from the subscription server. Because ordinary BLF application
will send subscription package to the registration server
Enables or disables SIP encryption.
Sets the key for SIP encryption.
Enables or disables RTP encryption.
Sets the key for RTP encryption.
Enables Auto Answer.
User Manual
5-19