Table of Contents
Advertisement
User Manual
5.6.6 Web Dial
This function enables you to make a call through the Web page. After inputting the phone number and
select a line, you can call out by clicking Dial. To terminate a call, click Hangup.
Figure 5-24 Wed dial setting interface
5.6.7 MCAST
Figure 5-25 MCAST interface
Use the multicast function to send notice to every member of the multicast is simple and easy. By
setting the multicast key on your phone, you can send multicast RTP flow to the pre-configured
multicast address. By listening multicast address is configured on the phone, listen and play the
multicast address to send the RTP stream.
Send multicast setting
On the phone web page, function key-function key, set a function key，as shown
5-40
NRP1000 Series IP Phone
www.newrocktech.com
Advertisement
Table of Contents
