Dial Plan - New Rock Technologies NRP1012 User Manual

User Manual
Name
Enable Auto
Switch Line
Allow IP Call
Play Talking
DTMF Tone
Play Dialing
DTMF Tone
Action URL
Settings
Action URL
Settings
Block
Settings
Block out

5.6.3 Dial Plan

This setting page consists of two parts Basic Settings and Dial Plan Table. Configurations of each part
are as follows:
Basic Settings:
End with "#": dial your desired number, and then press #.

Fixed Length: the phone will intersect the number according to your specified length.

Time Out: After you stop dialing and waiting time out, the system will send the number collected.

Press # to Do Blind Transfer: input the number you want to transfer to, and then press"#", you can

transfer the current call to the number.
Blind Transfer on OnHook: input the number you want to transfer to, and then hang up the handle

or press the speaker, you can transfer the current call to the number.
Attend Transfer on OnHook: hang up the handle or press the speaker you can realize the blind

transfer function
Press the DSS key Blind: Press the DSS key, the current call will turn out blind.

Dial Plan Table:
In this part, you can add dial plans and customize the number prefix.
In order to maintain the end-user pbx secondary dial for dialing call mode. When requested to enter a
phone number prefix, the system according to the rules in the closing number configuration rules,
5-34
Description
Specifies the Action URL that reports the operation of the phone to the server, for
example, url: http://InternalServer /FileName.xml? (Internal Server is the server IP
address. Filename is the name of xml that contains the action message).
Out
Sets the Add/Delete Limit List. Please input the prefix of the phone numbers that you
forbid the phone to dial. For example, if you want to forbid to dial the phones with
prefix 001, you need to input 001 in the blank of limit list, and then you cannot dial
any of these phone numbers with prefix 001.
X and are wildcard x means matching any single digit. For example, 4xxx that
represents any number with prefix 4 and the length of which is 4 will be forbidden to
dial out, means matching any arbitrary number digit. For example, 6 that represents
any number with prefix 6 will be forbidden to dial out.
NRP1012 Series IP Phone
www.newrocktech.com