Advanced Function; Call Pickup; Join Call; Redial/Unredial - New Rock Technologies NRP1012 User Manual

User Manual
for the moment. In addition, you use the navigation key
pressing HOLD, the selected call is retrieved and the current call is held automatically. You can define
the four line keys as multi-line keys on the Web page, with each line key corresponding to a call. The
line key lights on during the conversation and blinks after the call is held.

3.2 Advanced Function

3.2.1 Call Pickup

Call pickup is implemented by simulating the pickup function of private branch exchange (PBX). That
is, when A calls B, but B does not answer for the moment, C can thus pick up the phone and answer the
call after inputting the specified prefix code and B's number.
The following chart shows how to configure an appointed prefix in dial peer to have call pick up
function.
*1* represents a specified prefix code. C can answer A's call by inputting *1* and B's phone number.
Users can set prefix in random, in the case of no affecting current dialing rules.

3.2.2 Join Call

If there is a conference call and A wants to join it, A needs to input a specific prefix code and the
conference number.
The following chart shows how to configure an appointed prefix in dial peer to have join call function.
*2* means an appointed prefix code. After completing the above configuration, A can dial *2* plus B
or C number to join B and C's call. Users can set prefix in random, in the case of no affecting current
dialing rules.

3.2.3 Redial/Unredial

In the scenario where A calls B, but B is busy, A is prompted to hang up the phone. To ensure that B
can answer A's call as soon as B is idle, A can enable the redial function.
The redial function requires A to dial a specific prefix code before B's number. If B is idle, B can
answer A's call by picking up the phone; if B is busy and A hangs up the phone as prompted, A will
subscribe B's call status every 60 seconds. As soon as B becomes available, A is prompted to hook off
and calls B automatically. B can answer A's call after picking up the phone. If B becomes available, but
A is occupied and unwilling to contact B for the moment, A can disable the redial function by dialing
the prefix code before B's number.
3-4
NRP1012 Series IP Phone
or to select a call to retrieve. After
www.newrocktech.com