User Manual
5.9 Security
5.9.1 Web Filter
Figure 5-35 Web filter interface
In this page, you can configure devices in a certain IP address segment to access the MMI of the phone
for configuration and management.
Table 5-29 Web filter parameters setting
Name
Web Filter Table
Settings
Web Filter
Setting
Notice: Do not set your visiting IP outside the Web filter range, otherwise, you cannot logon through the
web.
5.9.2 Firewall
In this Web interface configure the firewall to prevent unauthorized Internet access (both input and
output), improving the network security.
There are two types of rules, input and rules. Each rule is numbered and you can configure a maximum
of 10 rules of each type.
5-54
Description
Adds or deletes the start and end IP addresses. IP addresses within this IP
network segment can access the phone. To make the configuration effective,
click Apply.
Enables the Web filter function on the phone. You can tick off the item and click
Apply to make the configuration effective.
NRP1012 Series IP Phone
www.newrocktech.com