Remote Contact - New Rock Technologies NRP1012 User Manual

User Manual

5.6.5 Remote Contact

Figure 5-23 Rremote Contact setting interface
In this page, you can configure an address for the XML phonebook address. After that, you can directly
access the corresponding remote phonebook after pressing the remote contact key on the phone.
For example:
You can set name of the phonebook to fanvil or ldap, with the respective server URL to
tftp://192.168.1.3/admin/phonebook/index.xml and ldap://192.168.1.3/dc=winline,dc=com.
Table 5-22 Remote Contact parameters
Name
Remote
Phonebook
Setting
Phonebook Name
Server URL
SIP Line
Authentication
User/password
5-38
Description
Specifies the name to be displayed on the phone.
Specifies the server URL of the remote phonebook.
Specifies the SIP line for the remote phonebook.
Specifies the authentication mode for the remote phonebook. This parameter is used
for LDAP.
Specifies the authentication username and password.
NRP1012 Series IP Phone
www.newrocktech.com