Ext Key - New Rock Technologies NRP1012 User Manual

NRP1012 Series IP Phone
Table 5-23 Function Key parameters setting
Name
Screen Configuration
Contrast
Enable Backlight
Line Key Settings
In this part, you can set the Line: select Auto, SIP1, SIP2 or IAX2 in function key type. After you set it, you
pick up handset or hands-free, press this function key, and then you can use the corresponding SIP line.
Function
Settings
key
Type
Value
Line
Subtype
Pickup Number
NOTE：
Memory keys can be configured as follows:
Speed Dial function, through the configuration of the key corresponding to the number of ways as shown
below.
User can press the F1 key to allocate this number by line1 line.
Intercom function, you can press this key in standby to automatically answer the call and make each other.
User can be configured in accordance with push to talk function the way: 4116 was the other number; Then
press the standby button to automatically answer the call 4116.
key can be configured through the following events:
For example:

5.7.2 EXT KEY

EXT key has the same usage with the Function key. The IN port of the extension board is connected to
the phone and the OUT port is connected to another extension board. If there is only one extension
board, the power supply is not needed; if there are more than one extension board, the first board needs
to connect to a 5V power supply through the RJ-45 direct connector.
New Rock Technologies, Inc.
Description
Sets the contrast of the screen.
Turns the backlight on or off.
Key
Shows the function key's serial number.
Memory Key: settings can be stored in key storage for each number, the standby or
off-hook, selects the function keys on the keyboard can call this number.
Line, sets the dial mode (Auto, SIP1, SIP2, IAX2).Key Event functions, monitor state.
DTMF: In the call, sends DTMF.
URL: You can input remote book url.
Sets the type parameter values.
Chooses the lines for this feature.
Selects the function parameters Key Event and Memory Event.
Please input the pickup number When SubType is BLF or presence.
User Manual
5-43