Qos & Vlan - New Rock Technologies NRP1012 User Manual

User Manual
Name
DHCP Service
NAT
Port Mirror
Enable Bridge
Mode
The LAN configuration no long takes effect in bridge mode.

The system reboots after the LAN IP address or bridge mode changes.

5.4.3 QoS & VLAN
The NRP1012/P supports 802.1Q/P and DiffServ configurations. The VLAN function can be divided
into Voice VLAN and Data VLAN by VLAN IDs. If Data VLAN is configured, signaling, voice
streams, and other data streams are tagged with different VLAN IDs to make the VLAN application
more flexible.
Figure 5-11 QoS & VLAN setting interface
5-10
Description
Enables the DHCP server of the LAN port. If you modify the LAN IP address, the
phone will automatically modify contents in the DHCP Lease Table according to the IP
address and subnet mask, and then save the modification. To validate the DHCP
service settings, you need to reboot the phone.
Enables NAT.
Enables the Port Mirror function. This function takes effect only in bridge mode. Port
mirror is used to copy the data stream from the WAN port to the LAN port of the
phone.
Enables the bridge (transparent) mode. With this function, the phone will no longer set
an IP address for the LAN physical port, and LAN and WAN port are connected to the
same network. After the setting, click Apply, and the phone will reboot.
NRP1012 Series IP Phone
www.newrocktech.com