Lines / Dial Peer; Table 3 - Dial Peer Settings For Lines On Web - New Rock Technologies NRP1002/P User Manual

NRP1002/P IP Phone User Manual
Enable GRUU
BLF Server
BLF List Number
SIP Encryption
SIP Encryption Key
RTP Encryption
RTP Encryption Key

8.13 LINES / Dial Peer

This functionality offers you more flexible dial rule, you can refer to the following content to know how to use
this dial rule.
Parameters
Phone number
Note: Two different special characters are used.

x -- Matches any single digit that is dialed.

[ ] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated
by commas, or a list of digits.
Destination
Port
Alias
Note: There are four types of aliases.
www.newrocktech.com
Support Globally Routable User-Agent URI (GRUU)
The registered server will receive the subscription package
from ordinary application of BLF phone.
Please enter the BLF server, if the sever does not support
subscription package, the registered server and subscription
server will be separated.
BLF list allows one BLF key to monitor the status of a group.
Multiple BLF lists are supported.
Enable SIP encryption such that SIP transmission will be
encrypted
Set the pass phrase for SIP encryption
Enable RTP encryption such that RTP transmission will be
encrypted
Set the pass phrase for RTP encryption

Table 3 - Dial Peer Settings for Lines on Web

Description
There are two types of matching: Full Matching
or Prefix Matching. In Full matching, the entire
phone number is entered and then mapped per
the Dial Peer rules.
In prefix matching, only part of the number is
entered followed by T. The mapping takes place
whenever these digits are dialed. Prefix mode
supports a maximum of 30 digits.
Set Destination address. This is for IP direct.
Set the Signal port, and the default is 5060 for
SIP.
Set the Alias. This is the text to be added,
replaced or deleted. It is an optional item.
44/68