Network; Wan - New Rock Technologies NRP1012 User Manual

User Manual

5.4 Network

5.4.1 WAN

Figure 5-9 WAN setting interface
Table 5-7 WAN parameters setting
Name
WAN Status
Active IP Address
Current Subnet
Mask
Current IP
Gateway
MAC Address
MAC Timestamp
WAN Settings
Obtain DNS
Server
Automatically
Static IP
5-8
Description
Specifies the current IP address of the phone.
Specifies the subnet mask of the phone.
Specifies the current gateway IP address of the phone.
Specifies the MAC address of the phone.
Specifies the time when the MAC address is obtained.
Indicates whether to obtain the DNS address in DHCP mode. If the value is set to
Disabled, you will obtain the DNS address in static IP mode. The default value is
Enabled.
Indicates whether to enable the static IP mode. If you can obtain a fixed IP address
from the ISP service provider, you can enable this mode and fill up information such as
the static IP address, subnet mask, gateway, and DNS domain name. The preceding
information can be obtained from the ISP service provide or network administrator.
NRP1012 Series IP Phone
www.newrocktech.com